You usually don’t think about your furnace until it breaks down. In the dead of winter, the last thing you want to deal with is a broken or leaky furnace.
This May Be Attributed To One of Five Factors
The two most common furnaces are a conventional furnace and a condensing furnace. Due to their older design, condensing furnaces are much more prevalent in today’s homes than conventional ones.
Condensation is a natural process. Consequently, the stove creates heat, but it also produces water as a by-product of the process.
The most prevalent causes of a leaking furnace are listed below.
1. Drainage Issues with Condensate
Condensation is a typical occurrence in furnace operation. This means that specific components for removing excess condensation have been devised and produced.
The condensate drain on a furnace collects condensation and carries it to a drainpipe, where it is dumped outside. If you find yourself caught up in fixing this issue, search the Bryant HVAC service near me.
If the drain becomes clogged, condensation will build up in the condensate pan and overflow. As a consequence, your furnace will begin to leak water. In the winter, a frozen pipe is a common source of drainage pipe blockage. Before contacting a furnace service, thaw it out with warm (not boiling) water if it’s iced over.
2. Coils on the Evaporator or a Clogged Air Filter
This might be a problem if you have a split HVAC system, including an air conditioner and a furnace that serves as an air handler.
The air filters remove dirt before the air is channeled over the evaporator coils to be heated. If these air filters get too dusty or clogged, they will not filter adequately. The same may be stated for the heating and cooling system air filters. The furnace might leak and even cause permanent damage if these components are not cleaned regularly. To fix this issue search the Bryant HVAC service near me.
3. A Non-Functioning Secondary Heat Exchanger
A furnace transfers the heat from burned fuel into your home. In this situation, the air is passed over to hot energy, resulting in heat exchange and a warm home. The following are some of the most common heat exchanger issues:
- A crack in a heat exchanger
- A decaying, pitted, rusted, or pitted heat exchanger.
- A heat exchanger with a gap in it.
- A filthy heat exchanger has been exposed to the elements.
4. For a Leaking Furnace, a Humidifier
The humidifier causes a problem in your furnace, a prevalent issue. It’s also an issue that may be recognized early if you get your furnace serviced regularly.
5. Error in Vent Pipe Design
An older furnace’s poor vent pipe design may cause moisture build-up. A typical furnace cannot capture the heat from exhaust gases. Instead, the moisture is evacuated as soon as it is created. As a consequence, there is no condensation in the vent pipe.
If water is seeping or puddling around your furnace, you have a problem. Every homeowner knows that combining an electrical appliance with water is a recipe for disaster. That’s why detecting a furnace leak and contacting repair services as soon as possible is vital. To fix this issue, search for Bryant furnace repair near me.